Artigos - Knovatu

Tom Adams Tom Adams

0 Curso Matriculado 0 Curso Concluído

Biografia

Premium NS0-093 Exam & NS0-093 Questions Answers

Once you learn all NS0-093 questions and answers in the study guide, try ActualTestsQuiz's innovative testing engine for exam like NS0-093 practice tests. These tests are made on the pattern of the Network Appliance real exam and thus remain helpful not only for the purpose of revision but also to know the real exam scenario. To ensure excellent score in the exam, ActualTestsQuiz’s braindumps are the real feast for all exam candidates. They contain questions and answers on all the core points of your exam syllabus. Most of these questions are likely to appear in the NS0-093 Real Exam.

The NS0-093 exam covers a broad range of topics related to NetApp hardware support, including hardware installation and configuration, system troubleshooting and repair, firmware and software upgrades, and performance tuning. NS0-093 Exam is designed for hardware support engineers with at least six months of experience working with NetApp storage systems.

>> Premium NS0-093 Exam <<

Pass Guaranteed Quiz Network Appliance - Professional NS0-093 - Premium NetApp Accredited Hardware Support Engineer Exam

Our NS0-093 preparationdumps are considered the best friend to help the candidates on their way to success for the exactness and efficiency based on our experts’ unremitting endeavor. This can be testified by our claim that after studying with our NS0-093 Actual Exam for 20 to 30 hours, you will be confident to take your NS0-093 exam and successfully pass it. Tens of thousands of our loyal customers relayed on our NS0-093 preparation materials and achieved their dreams.

Network Appliance NS0-093 exam is designed to validate the skills and knowledge of hardware support engineers who work with NetApp storage systems. NetApp Accredited Hardware Support Engineer certification is key for those who wish to demonstrate their expertise in ensuring the high availability and performance of NetApp systems. By passing the NS0-093 exam, candidates can become NetApp Accredited Hardware Support Engineers.

Network Appliance NS0-093 (NetApp Accredited Hardware Support Engineer) Exam is designed to test professionals who have expertise in troubleshooting and maintaining NetApp hardware systems. With the increasing demand for reliable storage solutions, network engineering professionals are required to demonstrate their knowledge and skillset. The NS0-093 Exam ensures that hardware support engineers are able to diagnose and resolve issues related to NetApp hardware effectively.

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q44-Q49):

NEW QUESTION # 44
On a NetApp FAS9000 system, which two field replaceable units (FRUs) are supported for replacement without takeover? (Choose two.)

A. I/O module
B. NVRAM module
C. caching module
D. DCPM module

Answer: A,B

Explanation:
FRUs on FAS9000 Supporting Replacement Without Takeover:
* A (I/O Module): I/O modules can be replaced hot (without takeover) to maintain system uptime during hardware servicing.
* D (NVRAM Module): NVRAM modules on FAS9000 can also be replaced without a node takeover, ensuring data integrity during replacement.
Why Other Options Are Incorrect:
* B (DCPM Module): The DCPM (Data Center Power Management) module is not hot-swappable and requires a node takeover.
* C (Caching Module): The caching module is integrated and typically requires a node takeover or power-down for replacement.
NetApp Reference Documentation:
* Refer to the "NetApp FAS9000 Hardware Service Guide" for supported FRU replacement procedures and operational constraints.

NEW QUESTION # 45
Which two of the following methods are valid ways to access a node which is not booting? (Choose two.)

A. node management port
B. serial console
C. Service Processor
D. cluster management port

Answer: B,C

Explanation:
If a node is not booting, the following methods can be used to access the system for troubleshooting:
* What it does:The SP provides out-of-band management access to the node, even if the node is not booting.
* How to use:
* Connect to the SP using SSH or a direct console connection.
* Use SP commands to gather logs or perform diagnostics.
1. Service Processor (SP)
* What it does:The serial console provides direct access to the node's bootloader or maintenance mode.
* How to use:
* Connect to the serial port using a terminal emulator.
* Use console commands to interact with the system.
2. Serial Console
* A. node management port:
* The node management interface is only accessible if the node is booted and ONTAP is running.
* B. cluster management port:
* The cluster management interface requires the cluster to be operational, which is not possible if the node is not booting.
Why Other Options Are Incorrect:
* NetApp "Service Processor and Serial Console Guide" provides instructions for accessing a non- booting node.
References:

NEW QUESTION # 46
Which two scenarios are common causes of the root volume needing root volume recovery? (Choose two.)

A. The root volume ran out of space.
B. The cluster configuration is out of sync on the volume.
C. The mainboard was replaced following a Non-Maskable Interrupt (NMI) panic.
D. Root volume migrate was performed.

Answer: A,C

Explanation:
* If the root volume runs out of space, it can cause operational issues and require recovery.
* The root volume must always have sufficient space for system logs, configuration files, and core dumps.
1. Root Volume Ran Out of Space:
* When a mainboard is replaced, the system configuration stored in the root volume may need to be restored or recovered.
2. Mainboard Was Replaced Following an NMI Panic:
* C. Root volume migrate was performed:
* Root volume migration is a normal operation and does not typically cause the need for root volume recovery.
* D. The cluster configuration is out of sync on the volume:
* While this can cause configuration issues, it does not directly lead to root volume recovery.
Why Other Options Are Incorrect:
* "ONTAP Root Volume Management Guide" explains scenarios leading to root volume issues and recovery procedures.
References:

NEW QUESTION # 47
Which two tools can you use to invoke AutoSupport? (Choose two.)

A. the NetApp Active IQ website
B. the SmartSolve tool
C. CLI
D. NetApp Cloud Insights

Answer: A,C

Explanation:
To invoke AutoSupport in ONTAP, the following tools can be used:
* How to use:Run the command:
1. CLI (Command Line Interface)python
Copy code
autosupport invoke -node <nodename> -type all
* This triggers AutoSupport to collect and send logs and system information.
* How to use:Log in to the Active IQ portal and use its interface to request an AutoSupport message from the connected ONTAP systems.
2. NetApp Active IQ website
* A. NetApp Cloud Insights:
* This tool is used for monitoring and performance analysis, not for triggering AutoSupport messages.
* D. the SmartSolve tool:
* SmartSolve is used for case resolution guidance but does not invoke AutoSupport.
Why Other Options Are Incorrect:
* "ONTAP AutoSupport Guide" provides instructions for invoking AutoSupport via CLI and Active IQ.
References:

NEW QUESTION # 48
You have replaced a failed boot device. You perform boot_recovery and receive no errors. However, when the node reboots, it reports that it has no disks.
What are two possible causes? (Choose two.)

A. The disks that are owned by this node have been marked as failed.
B. The interconnect is down.
C. The node is booting a lower version of ONTAP software than was last used.
D. The SAS cables were incorrectly reconnected after reinstalling the motherboard.

Answer: C,D

Explanation:
Possible Causes for "No Disks" Error:
* A (Incorrect SAS Cabling): If the SAS cables are incorrectly reconnected or swapped after replacing the boot device, the disks may not be detected because the physical connection to the shelves is compromised. Verifying and reseating the SAS cables is essential.
* C (Lower ONTAP Version): If the node boots into an ONTAP version that is lower than the version previously used, it might not recognize the RAID labels or disk metadata created by the higher ONTAP version.
Why Other Options Are Incorrect:
* B (Disks Marked as Failed): Disks that are marked as failed would still be visible in the system, though unusable.
* D (Interconnect Down): An interconnect failure affects HA functionality but does not prevent a node from detecting its own disks.
NetApp Reference Documentation:
* Refer to the "ONTAP Boot Recovery Guide" and "SAS Cabling Guide" for steps to resolve disk detection issu

NEW QUESTION # 49
......

NS0-093 Questions Answers: https://www.actualtestsquiz.com/NS0-093-test-torrent.html